Some users of electronic balances will find that there is a sound anomaly when using an electronic balance. What is the reason? Does it affect the weighing of the balance? Shanghai Jiu Ba following a simple analysis of the reasons:
Electronic balances sometimes have no sound after booting, it may be that the buzzer is broken, but some electronic scale manufacturers set the buzzer switch parameters in order to save power, so the user personality may encounter this problem. Check the instructions below to see if you accidentally turned off the buzzer after entering the parameter settings. This kind of thing is common!
In addition, there is sound after the electronic balance is turned on, but if the sound is very large or small, or there is hoarseness, etc., this situation can not be too careless, it is normal!
Electronic balance instructions:
1. In order to use the balance correctly, please familiarize yourself with the status of the knowing balance:
* O is displayed in the upper right corner of the display : the display is in the off state;
* O is displayed in the lower left corner of the display : the instrument is in standby mode and can be weighed;
* A diamond logo appears in the upper left corner of the display: indicates that the instrument's microprocessor is performing a function and no other tasks are accepted at this time.
2. The balance has been rigorously calibrated during installation, so the balance cannot be easily moved, otherwise the calibration work needs to be repeated.
3. It is strictly forbidden to weigh directly without weighing paper ! After each weighing, please clean the balance to avoid pollution to the balance and affect the weighing accuracy and affect the work of others.
Dishwash Liquid,Dish Washing Soap,Dish Washer Detergent,Kitchen Dishwashing Liquid Detergent
Wuxi Keni Daily Cosmetics Co.,Ltd , https://www.kenidailycosmetics.com