The centralized treatment equipment for welding fume purifiers is widely used in various welding fumes for the whole industry, laser, plasma, flame cutting and so on. It is also suitable for multi-station welding fumes. The centralized welding fume purifier adopts the method that the de-smoking main engine uses the pipeline to connect with the welding arm, and the collected soot is processed by the centralized de-smoking device, which is suitable for the dust purification during the welding operation where the welding station is more concentrated and the welding station is more concentrated. . Centralized processing does not occupy the factory space, the overall layout is beautiful, and the use is convenient. The purifying main machine adopts PLC control, and the pulse is automatically backflushed to collect dust, which is convenient for maintenance. The special filter for soot is used, the precision of purifying particles can reach 0.01um, and the purification rate is over 98%, which can greatly improve the dust pollution situation of the whole space.
What are the factors in the installation design of the centralized processing equipment for the welding fume purifier that affect the dust collection efficiency of the centralized welding fume purification system?
1, the impact of dust resistivity. The effect of the resistivity on the deposition of dust on the dust collecting pole.
2. The impact of dust accumulation.
3. The influence of dust concentration. The collection efficiency will decrease due to the increase in dust concentration. Because the density of the charged dust particles increases with the increase of the dust concentration, the large space charge formed by the charged dust particles will have a shielding effect on the corona discharge, and a corona prevention effect will occur.
4. Influence of airflow velocity and airflow distribution. The reason why the increase of the airflow speed causes the reduction of the collection efficiency is not only reflected in the multi-qiqi efficiency formula, but also because the dust or particle cluster deposited on the dust collecting pole of the sputum is subjected to the friction of the airflow when the gas passes through the precipitator.
5. The influence of dust particle size and its bulk density. Since the driving speed of dust varies with the particle size of dust, the collection efficiency of dust of different particle sizes in the welding smoke purifier is different.
The cleaning effect of the centralized welding fume purification system will directly affect the dust removal efficiency. Many dust collectors have reduced dust removal efficiency after running for a period of time, which is mainly due to the deterioration of the cleaning effect. With its unique operating principle, it can improve the cleaning effect and ensure that the dust collector has better dust removal efficiency.
Welding fume purifier centralized treatment equipment installation design centralized welding fume purifier product features:
1. The filter element is automatically cleaned and does not need to stop the host and other operations. When the saturation resistance of the surface of the filter cartridge reaches a certain allowable value, the automatic cleaning function is turned on, and each filter cartridge unit is individually backflushed cleanly in the working process of the main machine to ensure that the dust remover is always in good working condition.
2. All filter cartridges adopt vertical placement structure, and the dust purification effect is more effective than other structural forms. The special Teflon film covered on the surface of the filter cartridge can ensure the long service life of the filter cartridge.
3. Filter cartridges with different filter materials can be selected to meet the dust removal or air filtration of different properties.
4. The filter cartridge replacement method is removable, and can be replaced without using any auxiliary tools.
5. The left and right sides are pre-configured with pipe connections, which can be freely selected by the user according to the use.
6. The high-performance worm gear fan is equipped with large suction air and strong suction.
7. The filter cartridge can be observed by the digital meter on the control panel.
8. Use 1μm (adjustable) filter to prevent the inhalation of particulate matter containing water and oil.
Welding smoke purifier centralized processing equipment installation design For more information contact: Kenneth Yang Hebei Environmental Protection Equipment Co., Ltd. Our company's strict quality control, to provide customers with qualified high-quality equipment for the purpose. With a comprehensive and strict quality control process, the product has passed multiple quality inspection processes: self-inspection, random inspection, and comprehensive inspection. Our factory has large production scale, short cycle and rich experience in manufacturing. Our company's equipment is subjected to no-load test and inspection by the company's quality inspection department before leaving the factory, including the appearance, equipment nameplate and other aspects of testing; after the qualified, the factory is allowed, so the quality of the equipment is guaranteed, please rest assured to buy and use.
Tetanus Toxoid Vaccine,Toxoid Vaccine,Hep B Immune Globulin,Immunoglobulin Injections
FOSHAN PHARMA CO., LTD. , https://www.fs-pharma.com