The small juice production line is filled with high temperature and is suitable for hot filling of juice drinks at 80-95 °C. The liquid contact part is made of sanitary grade 304 or 316 stainless steel. The filling equipment cancels the traditional liquid cylinder filling method. The juice beverage directly inputs the juice directly from the hot and cold tank into the filling valve through the beverage pump, and the beverage is directly filled through the filling head. It effectively solves the prolonged filling time caused by the storage buffer after the beverage enters the liquid cylinder. The excess material is re-introduced into the mixing tank directly through the secondary return tank or the material is reheated by hot and cold. The temperature is up to the filling condition and refilled, which effectively guarantees the quality of the beverage and the conditions for aseptic hot filling. After filling, the glass bottle beverage is sterilized by pouring bottle. The bottle mouth is easy to hide bacteria in the air. The heat of the juice is used to tilt the bottle, the juice is facing down, and the instant kill is carried out in a few seconds. After the bottle is erected, the bottle is erected into the cold spray. Temperature regulation.
Main performance of small juice production line :
1. The air feeding device is used for the bottle, and the hanging bottle neck is adopted. The bottle speed is fast and the bottle is not deformed;
2. The rinsing bottle mouth adopts advanced card bottleneck technology to avoid contact with the threaded mouth, which is more sanitary. The bottle is transported using the bottle neck technology. The bottle shape does not need to be adjusted, and only the guard plate related to the diameter of the bottle body is changed;
3. Filling adopts valve lifting technology, and the filling valve adopts the new micro pressure filling principle, which is accurate and accurate;
4. The screw cap adopts the capping technology of catching and rotating, and the capping device selects the low position installation and the horizontal cover;
5. Adopt high-efficiency cover system with perfect automatic control and protection device;
6. Compact structure, perfect control system, convenient operation and high degree of automation;
7. To change the shape of the bottle, just replace the star wheel of the screw cap, and the curved guide plate can be realized;
8. The parts in contact with the material of the small juice production line are made of stainless steel, with no dead corners and easy to clean;
9. Adopt high-speed filling valve, the liquid level is accurate and there is no liquid loss, ensuring the filling process requirements.
PC Board Venlo Greenhouse
Venlo structure is a popular one at present. This architecture uses horizontal girder as main bearer, forming a stable structure with columns. There is consolidation between horizontal girder and column, and hinge is used to connect column and foundation.
In Venlo greenhouse, foundation is made of reinforced concrete and the side wall is made of brick or reinforced concrete plate. The steel frame always use hot dip galvanized light steel. Roof beam adopts horizontal girder structure and using herringbone connection. The horizontal girder bears 2 or more roofs, which is made of aluminum alloy. This material is used as roof structure material and also glass inlay material. Other beams using gutter style to minimize the section. Delighting material of the roof and side wall using the hollow double-layer or multilayer PC board.
PC board is mainly made of PC/PET/PMMA/PP materials, it need sun screen coating to resist ultraviolet resist and ageing, and it is also required to be anti condensation and antidrug.
As a kind of light material, use PC board can greatly reduce the weight of greenhouse structure, and corresponding reduced the size of the steel frame, which saving the cost of steel.
Pc Board Venlo Greenhouse,Venlo Greenhouse,Venlo Type Pc Sheet Greenhouse
JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.greenhousehydroponic.com
