Due to the fast drying speed of the spray dryer, the uniformity of the particles after molding, and the quality, it has been widely used in the chemical, pharmaceutical, light industry, food, mining and other industrial fields. The spray produced by Changzhou Fengneng Dry Engineering Technology Co., Ltd. The dryer has high thermal efficiency, short drying time and energy saving and is widely used in various industries. 
The drying equipment industry has begun to enter a more mature stage of development, in various fields, to better meet the actual needs of users. In the actual use of the spray dryer, due to the high viscosity of the special material, it is easy to form a sticky wall. In the process, the spray droplets used in the process do not dry, and adhere to the wall before contacting the wall.
The serious consequences of a spray dryer after sticking to the wall:
1. After sticking to the wall material, it may be burnt or deteriorated due to long-term stay on the inner wall, which may affect the quality of the product.
2. Sticky wall materials, often blocking the bottom of the product falling into the dryer, may not reach the required moisture content.
3. Since the adherent material agglomerates into the product, some products have to be enlarged during the grinding process in order to achieve a certain degree of fineness.
4, many spray drying equipment, in order to remove the sticky material, stop spraying, spray drying, thereby reducing the actual operating time.
5. The problem of sticking wall caused by improper design or operation is serious, and even spray drying equipment cannot be produced normally.
The serious consequences of a spray dryer after sticking to the wall:
1. After sticking to the wall material, it may be burnt or deteriorated due to long-term stay on the inner wall, which may affect the quality of the product.
2. Sticky wall materials, often blocking the bottom of the product falling into the dryer, may not reach the required moisture content.
3. Since the adherent material agglomerates into the product, some products have to be enlarged during the grinding process in order to achieve a certain degree of fineness.
4, many spray drying equipment, in order to remove the sticky material, stop spraying, spray drying, thereby reducing the actual operating time.
5. The problem of sticking wall caused by improper design or operation is serious, and even spray drying equipment cannot be produced normally.
Boob tape, breast lift tape
Boob tape is based on 95% cotton and 5% Elastic Spandex fabric. The material is safe, soft, breathable, which makes you comfortable in it. It has super strong elasticity, lateral stretching is more than 230%. It is coated with imported wave pattern glue, which ensures the tape has stable adhesion and easy to remove, do not hurt your skin. It has a certain waterproof effect, the adhesion will not be reduced even you are sweaty or swimming. It has wonderful lifting and gathering effect, let you have a proud chest curve.
boob tape,breast lift tape,boob tape and nipple cover,boob lift tape,breast tape
Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytape.com