Dry heat sterilizer , also known as dry sterilizer, high temperature hot air sterilizing box, is the use of high temperature dry heat for the oxidation of microorganisms, protein denaturation, dielectric concentration caused by poisoning. Among them, the destruction of the cell protoplasm is mainly caused by oxidation, and the microorganism is killed, so that all microorganisms can be killed within a certain heating time. After understanding the working principle of the dry heat sterilizer, you can know what needs to be paid attention to and how to better maintain it. The following is a brief introduction to common points of attention.
1. The instrument should not be used under high voltage, high current and strong magnetic field conditions to avoid interference and electric shock.
2. Electroplated parts and surface finishes should be kept clean. If they are not used for a long time, they should be coated with neutral grease or petroleum jelly on the plated parts to prevent corrosion. The plastic case is covered with a plastic film dust cover. Place in a dry room to protect the temperature controller from moisture damage.
3. The inner casing of the box must be effectively grounded, and the power should be turned off after use.
4. The sterilization box should be placed in a well-ventilated room with flammable and explosive materials placed around it.
5. There is no explosion-proof device in the sterilization box, and no flammable or explosive materials should be placed.
6. Do not over-extrude the contents of the box, and make room for hot air circulation and disinfection.
The above points hope to help everyone, more related products, please pay attention to other products of the company.
1. The instrument should not be used under high voltage, high current and strong magnetic field conditions to avoid interference and electric shock.
2. Electroplated parts and surface finishes should be kept clean. If they are not used for a long time, they should be coated with neutral grease or petroleum jelly on the plated parts to prevent corrosion. The plastic case is covered with a plastic film dust cover. Place in a dry room to protect the temperature controller from moisture damage.
3. The inner casing of the box must be effectively grounded, and the power should be turned off after use.
4. The sterilization box should be placed in a well-ventilated room with flammable and explosive materials placed around it.
5. There is no explosion-proof device in the sterilization box, and no flammable or explosive materials should be placed.
6. Do not over-extrude the contents of the box, and make room for hot air circulation and disinfection.
The above points hope to help everyone, more related products, please pay attention to other products of the company.
Tylvalosin Tartrate,Tylvalosin Premix,Tylvalosin Veterinary Drug,Tylvalosin Tartrate Pig
Shandong Shengli Bioengineering Co., Ltd , https://www.shenglipharm.com