How to control the quality of the boiling dryer

How to control the quality of the boiling dryer ?

1. Any potential defects discovered during monitoring, whether or not they have an impact, must be corrected prior to shipment.

2. Pick mature quality engineers. Regardless of actual experience or status, they must be familiar with the art of defect prevention and product acceptance, and you can train them in auditing and monitoring.

3. If the supplier has also developed a detailed quality control plan based on the control points, then you may wish to use this plan as a reference to supplement your own main monitoring plan.

4. Invite the key quality and planners from the supplier to visit your factory. Guide them to the complete product system they provide, explain to them their responsibilities for the operation of their products, encourage them to set up a local contact agency, and encourage and assist them to establish a "zero defect" plan.

5. Take your raw material control representative to visit the supplier's factory, explain where he will review, and get full recognition from the supplier. At the same time, the obligations of their respective rights should be reiterated.

6. Give them when your people return to the factory.

7. If any defects are found during the sending or use of the boiling dryer , the weak links in the whole system should be analyzed accurately, timely and effectively.

8. If the * batch boiling dryer repeatedly makes a difference during the operation, you should personally return the boiling dryer to the supplier's factory and take effective measures.

9. Develop an adequate monitoring plan and yield system.