At present, the main symptom of the disease that injures the mushroom is to generate some spots on the mushroom cover. This is a disease of the cockroach. How to prevent it? Black spot. This is a bacterial disease caused by Pseudomonas. After the onset of disease, the mushroom mushroom caps appear oval brown or dark brown spots, the initial needle-like, enlarged diameter of 2 to 4 mm, neat edges, sometimes cracked cap. Control methods: The most important thing is to control the appropriate temperature and humidity. When watering the mushroom house, water should not be directly sprinkled on the fruit body of E. velutipes, and in particular it cannot be sprayed with cold water. The humidity inside the mushroom house cannot be higher than 90% for a long time. It depends on the weather changes. The sunny watering should be light, diligent and fine, and the rainy days should be less sprinkled or not watered. Increase the ventilation after each watering and then cover the film. The indoor temperature during the fruiting period should be adjusted to below 17°C. Mushrooms should be removed in time after onset and sprayed with 100-200 units of streptomycin or 600 times of bleaching powder per ml. Rust spot disease. The disease caused by Pseudomonas spp., mainly impregnated mushroom mushroom caps, the initial needle-like, after the expansion into sesame size, although the edge is not neat, but the lesions can be combined into an irregular large rust. Control methods: To prevent the occurrence of rust spot, do not spray directly on the fruiting body when spraying the mushroom house, and timely ventilation after spraying. The relative humidity of the indoor air should not exceed 95% for a long time. The moisture of the fruit body should be treated when the surface of the bacteria bag covers the plastic film. After drying. In the early stage of disease, germs should be prevented from spreading to healthy fruiting bodies and sprayed with 50% carbendazim 800 times solution or with 100-200 units of agricultural streptomycin per ml.
Butyl Rubber Stopper For Lyophilized Preparation
Our Butyl Rubber Stopper for Lyophilized preparation is made of medically Butyl rubber.The procedures of vulcanization, die cutting, washing and packaging in the workshop are set to meet the relative cleanliness classes.Moreover the quality control system is established according to GMP standards. Our advanced complete automatic vacuum technics make vulcanization process available.Our products have a successful compatibility between rubber stoppers and medicine.If you are looking for a supplier in china, welcome to contact us.
Butyl Rubber Stopper For Lyophilized Preparation,Stopper For Lyophilized Preparation,Butyl Stopper Medical Rubber Stopper,Assorted Butyl Rubber Stopper
Suzhou CRH New Material Technology Co.,Ltd. , https://www.crh-health.com
