The specific analysis and detection of the high-pressure gear pump motor overheating are as follows:
1. The assembly quality of the high-pressure gear pump is poor. Is there a friction or a difference between the motor and the pump shaft?
Check assembly quality and troubleshoot assembly?
2. Is the packing gland pressure too tight or the mechanical seal spring too tight?
Re-adjust the amount of spring compression of the gland or mechanical seal
3. Does the specific gravity of the medium exceed the high-pressure gear pump configuration motor?
Configure the appropriate high-pressure gear pump motor
4. Does the scope of use (flow, head) exceed the design requirements of the gear pump?
Select the right motor according to the series
According to the above conditions, we can analyze one by one to find out the real cause of overheating of the high-pressure gear pump motor, and repair it according to the corresponding fault.
Medical Consumables and Accessories
Medical Consumables and accessories
1. Made from 100% cotton absorbent gauze. Folded edges or Unfolded edges. 2. White, dyed green, green, dark blue color are available. 3. Yarn usually is 40S, but 32S is also available 4. Mesh can be 12x8, 18x11, 19x15, 20x12, 24x20, 26x18, 30x20, etc. 5. The sizes can be 5x5cm, 7.5x7.5cm, 10x10cm, 10x20cm, 20x20cm, etc. 6. It can be 8ply, 12ply, 16ply, 32ply, etc. 7. Sterile or Non sterile. Steriled by EO or Gamma. 8. With X-ray detectable or without 9. High soft, absorbency, poison free and could do isolating or absorbing, washing protecting function in surgical operation. strictly confirming to BP,EUP, USP. 10. Passed CE Certificate, ISO 13485, etc. 11. For disposable use before sterilization and its expiry time is 5 years.
Medical Consumables and Accessories,Medical Gauze,Medical Consumables,Medical Accessories,Medical Gauze Roll
Jiangsu Asbao Medical Technology Co., Ltd. , https://www.iigloves.com