First, the temperature difference between the stimulation: In the beginning of the formation phase of the fruiting body of Pleurotus ostreatus, the temperature difference of 7°C~10°C is stimulated every day, which can promote the early fruiting and the development of the fruit body is neat. Methods: During the daytime, the cover film is kept warm, the film is exposed on the sunny day or in the morning, the temperature difference is increased by cooling, and high temperature watering is used to induce mushrooming.
Second, high-temperature stimulation: first the bacteria bed (or bacteria bag) open and dry for 1 to 2 days, and then continue to re-spray water, spray 2 to 3 times a day, and even spray 2 to 3 days, during this period, generally open Membrane ventilation. The moisture content of the culture layer on the surface of the bacteria bed should be suitable for holding water in the hand. Finally, the water on the surface of the material is sucked with a cotton cloth, covered with a plastic film, and it can be budded after a few days.
Third, shock bacteria stimulation: When the medium covered with hyphae, the use of flexible wood bar extrusion, flapping, prompting the growth of mycelium and the rapid differentiation of fruiting bodies, generally can increase production by 15%.
Fourth, cover the pressure stimulation: the use of sterile old newspapers, sacks, fine soil and other covering on the surface of the culture material, under the stimulation of pressure, promote the rapid growth of mycelium.
Fifth, light stimulation: Pleurotus ostreatus should be sown after germination in dark conditions, until after the mycelium hair is good exposure. In the absence of light, it can be replaced by electric light, but also has a good stimulating effect.
Sixth, plant ash stimulation: After each batch of bacteria harvest, take 5% of the ash soaked in clear liquid spray, can promote mycelial growth, mushrooming and prevent redness, can increase production by 20%.
2004-2021 New Laser Distance Sensor
Are you looking for a distance photoelectric sensor with mm high accuracy? Yes, JRT manufactured the industrial laser lidar sensor since 2004. There are different models of high accuracy sensor, high frequency distance sensors, ip54 ip65 ip67 waterproof rating etc., you can choose. The laser measuring modules, some good for outdoor using, some can be connected to your Arduino,
Also, Analog Output, RS485, USB cable is optional. If you have any other requirements of our accuracy distance sensor, please fell free to contact us
Chengdu JRT Main Ranging Modules: Industrial Laser Distance Sensors, Laser Rangefinder Sensor , Tof LiDAR Sensors.
smart devices,photoelectric sensor,cmos sensor,laser module,laser lidar
Chengdu JRT Meter Technology Co., Ltd , https://www.accuracysensor.com