The high-speed centrifuge adopts variable frequency motor drive, microcomputer control, LCD display, automatic head recognition, 10 speed increase and deceleration control, 40 rent program storage space, automatic fault diagnosis, widely used in biology, medicine, genetics, agricultural science. , food hygiene, environmental protection and other scientific research and production units. How to keep the high-speed centrifuge in the best condition, Xiaobian for everyone to introduce.
First of all, you should pay attention to the manual of the high-speed centrifuge before use. You must follow the recommended method. Make sure that the ratio of water and air to the correct quality of the machine is correct. The lubricant used must be an approved brand of oil and must be inspected for regular use.
Secondly, it is necessary to monitor the centrifuge and monitor the vibration process of the equipment and the temperature of the bearing. Always check the equipment to see if there are any leaks and any abnormal sounds, and deal with them as soon as they are found. For the operation area, it is always necessary to keep it clean. Remember not to put the parts directly on the ground. In normal times, you should start to develop a good habit of operation, which will avoid mistakes in improper operation.
Again, the parts that are actually supplied by the original equipment manufacturer must be used for service and maintenance, and the parts should be stored in a clean, safe and dry place. Strict use of genuine accessories is required to achieve the promised performance and reliability, and to ensure the life of the equipment.
Finally, we must pay attention to the operation principle in the use of the equipment. To be safe to use, we must start from routine maintenance and correct operation. In the use of high-speed centrifuges, we must adhere to the matters that can be improved. The efficiency of the work, especially in accordance with the characteristics of high-speed centrifuges, can be used properly to maintain good running capacity.
This article was edited by the laboratory instrument - Hunan Gilson Technology Development Co., Ltd.
Pain Relief Patch For Neck Shoulder,Lower Back And Leg
Pain Relief Patch for neck shoulder, lower back and leg.
[Name] Medical Cold Patch
[Package Dimension] 10cm×12cm 2pieces/box
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application] For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give fast acting pain relief for strains, sprains, cramp, bruises, swollen areas or joint stiffness.
[How To Use a Patch]
Tear off the packaging bag and remove the patch. Remove the protective film and apply the patch on the skin. One piece, one time. The curing effect of each piece can last for 8-12 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
Store below 30c in a dry place away from heat and direct sunlight.
Pain Relief Patch,Pain Relief Pad,Pain Relief Plaster,Neck Pain Relief Patch,Back Pain Relief Pacth
Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.xijieyitongpatches.com